X1-01 nokia dual sim security code done..

X1-01 nokia dual sim security code done..

Tool:
[ATF] advance turbo flasher
procedure:
1.open atf suite
2.select infenion tab
3.selec model
4.click bus check
5.scan phone
6.go to maintainance
7.click reset all
8.done...

VBATT OFF...
VBATT ON
Setting VBATT Done!...

Booting Phone...
CPU ID Response: A200341100
CPU Type: XG110 2.1B
Phone Booted at after First attempt...

******************************************************
START INFINEON BUS CHECK
******************************************************


Sending PBL 37888 bytes...
PBL Successfully Sent...
Sending SBL 65024 bytes...
SBL Successfully Sent...

Flash Chip Manufacturer: STMicroelectronics
Flash Chip Type: M58WR064 64 Mbit (4Mb x 16) NOR
Extended Information: Multiple Bank / Burst / 1.8v

******************************************************
INFINEON BUS CHECK DONE
******************************************************


MCU: V 05.29 10-06-11 RM-713 (c) Nokia
IMEI: 359031041001720
Product Serial Number: B65421AAI
Product Code : 059G442
Module Code : 0204758
Basic Production Code: 059K2G8
MCU SW Version : V 05.29 10-06-11 RM-713 (c) Nokia IA
ADSP Version : p V 05.29\n10-06-11\nRM-713\n(c) NMP\nia
PPM Version : V 05.29 10-06-11 RM-713 (c) Nokia
HW Version : 3051
UEM Version : 1328
UPP Version : 8850
LCD Version : WIN:BARACOAv80 NT39121
********** SIMLOCK INFO **********
CONFIG_DATA : 0010100000000000
PROFILE_BITS : 0000000000030002
Asic : 11
Provider : Default Test Operator

Block [1] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [2] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [3] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [4] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [5] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [6] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [7] 1:Open 2:Open 3:Open 4:Open 5:Open
ST_LCD_TEST : PASSED



Make sure you have installed the
COMPLETE Flash Package for this Phone...

Goto "Settings" --> "Nokia Settings" and verify that
the Folder where you installed your Flash Files are
in the "PRODUCT PATH TO SCAN" List...

FACTORY SET TO : Full Factory Set
OK
FACTORY SET TO : User Data
OK
FACTORY SET TO : Leave Factory
OK
FACTORY SET TO : Service Center
OK
FACTORY SET TO : Software Upgrade
OK
FACTORY SET TO : Production Tune
OK

Pinout:x1-01